Introduction to Electronic Components: A Step By Step Guide

What you'll learn

• Understand the concepts of voltage, resistance and current
• Understand the VOLT OHM Meter/ Digital Multi Meter and how to use safely
• Use Ohm's Law to calculate voltage, current and resistance
• Use resistors in various configurations
• Understand and use capacitors
• Understand and use diodes
• Understand and use a transistor

Requirements

• A multimeter
• A breadboard, jumper wires and a battery
• Resistors, capacitors, LEDs, diodes, transistors, voltage regulators

Description

This Introduction to Electronic Components course is intended for those interested in learning electronics. The course introduces students to the concept of electronic components, their uses, and how they work within an electrical system. The electronics industry has been skyrocketing over the last few years as more and more people are using electrical appliances for their everyday needs. It is so important to know the basics of how these components work, as they are a necessity in modern society. Here is a step-by-step guide to help you understand what electronic components are, what they do, and how they function.

Electronic components are the building blocks of any electronic device, and they come in a wide range of sizes and shapes. These videos will walk you through some basic information about electronics so you know how to identify and use these building blocks. Practical examples are also added.

Why You Should Take This Course?

• Learn how to read circuit diagrams.
• Learn how to solder.
• Identify parts on an electronic schematic diagram.
• Become familiar with the most commonly used electronic components.

This course will give you everything you need to start playing with electronics components and fix electronic devices. It is designed so that you can quickly get started without having to spend months of your time learning lots of irrelevant information. It covers all of the basics, so even if you never plan on getting any further than this one course, you'll still learn more than enough. You will learn how to take care of the small components that are inside your electronics.

Continual Updates 4 Star | More Than 4200 STUDENTS!!! THANK YOU!!!

What Students Are Saying:

• "This is a nice introduction course to those who would like to learn the basics of electronics." - André Stenberg
• "It's covering the topic and establishing the basics very well." - Mike Mackley
• "Great course for beginning in electronics, especially enjoyed the water analogy part to make learning easier." - Sunil Thakur
• "Clear and Simple, and that is so nice :)" - Qays Qaysaneah

Topics Covered:

• The Components of Electricity
• Volt-Ohm-Meter Basics (Measuring Electricity)
• Circuit Diagrams Basics (Electronic Roadmaps)
• The Resistor
• Ohm’s Law
• The Capacitor
• The Inductor
• The Diode
• The Transistor (Electronic Valves)

In this Introduction to Electronic Components Course, we will begin by discussing the three components that make up electricity. Next, we will spend more extensive time on how to measure the three components of electricity. During this section, we will explore two of the three components (voltage and current). This section will cover VOM basics and allow you to become familiar with the most important and most basic piece of test equipment.

In the next section, Circuit diagrams section, you will learn how to use electronic component symbols on an electronic road map called a schematic or circuit diagram. Many of the symbols will represent new concepts for many of you, and these concepts will be fully developed once we finish the section. As a result, you will develop the fundamentals of interpreting circuit diagrams so that these illustrations of the arrangement of electronic components can help you with the remainder of the course.

The final of the three components, resistors, will be covered next. How the three components are related mathematically is Ohm’s Law, and this fundamental law will be covered in detail. These sections make up the basic, basic material of electronics.

Four additional components common to virtually all electronic circuits are the capacitor, inductor, diode, and transistor. I will cover these topics with a level of detail that will familiarize the audience with the function of these components and the basics of how they work and react in different situations. There are text reading assignments for each section of the course.

What You Will Learn

• Understand the basics of electricity and electronic components.
• Read and interpret circuit diagrams.
• Solder and handle electronic components.
• Identify and use resistors, capacitors, inductors, diodes, and transistors.
• Measure electrical properties using a volt-ohm meter (VOM).

Who Is This Course For

• Beginners interested in electronics.
• Students and hobbyists looking to understand electronic components.
• Anyone interested in fixing and working with electronic devices.

Requirements

• No prior knowledge of electronics required.
• Basic tools and components (a list will be provided).
• A volt-ohm meter (VOM) for measuring electrical properties.
• Enthusiasm and curiosity to learn about electronics!

About the Instructor Info Educational Engineering Team

Team of skilled Engineers Sharing Knowledge with the World

Educational Engineering Team is a Leading Team in Microcontroller Industry, with over 13 Years of Experience in Teaching and Doing Practical Projects.

We strive to put all our hands-on experience in these courses. Instead of superficial knowledge - we go into the depth of the topic and give you the exact - step by step blueprint on how to tame simple as well as complex topics in easy and digestible bite-sized videos.

This real-world knowledge enables you to grasp knowledge easily, and you can apply this learning immediately to your life and projects.

Educational Engineering Team has been in the Programming and Microcontroller business since 2007. We have been part of many projects. Over the course of these years - we have gained a good insight into students’ and educators’ needs. We are passionate about sharing all our collective knowledge with you. As of 2018, we have already taught over 250k-THOUSAND students and counting.

Currently, we have more than 100+ Courses

Educator and Author of "Educational Engineering".

Ashraf is an educator, Mechatronics engineer, electronics and programming hobbyist, and Maker. He creates online video courses on the EduEng YouTube Channel (More Than 4 Million View, 20k+ Subscribers) and is the author of four Microcontroller books.

As a Chief Educational Engineer since 2007 at Educational Engineering Team, the company he founded, Ashraf’s mission is to explore new trends and technology, helping educate the world to make it a better place.

Educational Engineering offers educational courses and Bootcamps, articles, lessons, and online support for electronics hobbyists, Programming hobbyists, Microcontroller hobbyists, STEM students, and STEM teachers.

That team also works as freelancer engineers, helping many students in their graduation projects, and provide guidance and consulting for many students over the years to help them kick-start their career.

Ashraf’s core skill is explaining difficult concepts in a step-by-step, easy-to-understand manner using video and text. With over 11 years of tertiary teaching experience, Ashraf has developed a simple yet comprehensive and informative style in teaching that students from all around the world appreciate.

His passion for Microcontrollers and Programming, particularly for the world of Arduino, PIC Microcontroller, and Raspberry Pi, has guided his personal development and his work through Educational Engineering.

Ashraf’s online courses have helped over 250,000 people from around the world to be better and to make a great career in the industry.

Educational Engineering Team offers courses on

• Circuit Design, Simulation, and PCB Fabrication
• Arduino, PIC Microcontroller, and Raspberry Pi
• Programming in C, Python, and other programming languages
• PLC Industrial Programming and Automation
• 3D Design and Simulation
• ESP and IoT World

Who this course is for:

• Anyone with a need to brush up their knowledge of basic electronics