1. Introduction
2. Sketching for Surfaces
3. Surface Creation Tools
-
1. Extruded Surface (3:36)
-
2. Extruded Surface Variations (2:54)
-
3. Extruded Surface Start Conditions (4:35)
-
4. Extruded Surface End Conditions (4:47)
-
5. Extrude Face (3:10)
-
6. Revolved Surface (2:35)
-
7. Revolved Surface Variations (3:07)
-
8. Swept Surface (5:16)
-
9. Swept Surface Guide Curves (5:56)
-
10. Swept Surface Orientatio And Twist (5:49)
-
11. Curvature Display (3:20)
-
12. Lofted Surface (3:57)
-
13. Lofted Surface Connectors (6:25)
-
14. Lofted Surface Guide Curves (5:05)
-
15. Lofted Surface Centerline Parameter (4:36)
-
16. Lofted Surface Start End Constraint (5:12)
-
17. Boundary Surface (5:44)
-
18. Boundary Surface Advantage (5:58)
-
19. Boundary Surface Example (3:02)
-
20. Filled Surface (3:48)
-
21. Cotrol And Constraint Curvature (5:54)
-
22. Filled Surface Using Edge (4:50)
-
23. Optimising Filled Surface (4:06)
-
24. Ruled Surface (5:16)
-
25. Ruled Surface Types (8:10)
-
26. Ruled Surface Options (3:53)
-
27. Offset Surface (4:17)
-
28. Planar Surface (4:58)
4. Exercises
5. Surface Modifiers
-
1. Trim Surface (4:50)
-
2. Trim Surface Types (5:38)
-
3. Trim Surface Advanced Options (4:02)
-
4. Untrim Surface (4:37)
-
5. Untrim Surface Advanced Options (2:28)
-
6. Cut With Surface (3:50)
-
7. Delete Face (3:30)
-
8. Delete Face Options (3:45)
-
9. Extend Surface (5:54)
-
10. Knit Surfaces (3:38)
-
11. Replace Face (3:11)
-
12. Thicken Tool (5:08)
-
13. Thicken Cut (4:03)
-
14. Fillet (2:58)
-
15. Direct Editing Move (1:58)
-
16. Freeform Tool (4:45)
-
17. Freeform Continuity Options (3:06)
-
18. Freeform Control Curves (3:19)
-
19. Freeform Control Points (3:44)
-
20. Freeform Symmetry (1:44)
-
21. Freeform Precise Control (1:54)
-
22. Flatten Surface (4:00)
6. Exercises
7. Project: Vintage Plane
8. Sample Exam (CSWPA-SU)
